Beat the snow — book your roof replacement before winter hits. Instant quote in seconds →
Warwick, RI Commercial Roofing — Flat EPDM Roof with Reflective Silicone Coating
After — Warwick, RI Commercial Roofing — Flat EPDM Roof with Reflective Silicone Coating After

Warwick, RI Commercial Roofing — Flat EPDM Roof with Reflective Silicone Coating

At the Post Rd building in Warwick, the crew ran the EPDM and coating work efficiently to keep disruption for the busy commercial property low.

Pinnacle makes every project affordable with monthly financing options, including 0% interest for 18 months.

A commercial building on Post Rd in Warwick needed a low-slope roofing solution built for the demands of a busy commercial property — watertight, low-maintenance, and energy-smart. Our crew delivered a flat EPDM membrane system finished with a reflective silicone coating, giving the building a durable, seamless surface that also fights heat gain in the summer months.

Scope of Work

The project started with a full assessment of the existing low-slope deck and drainage, followed by preparing a clean, sound substrate for the new system. Our crew installed a fully-adhered EPDM rubber membrane across the roof, with careful attention to the seams and the flashing at every wall, curb, and penetration. We then applied a reflective silicone coating over the membrane to add a monolithic top layer and boost solar reflectivity. Finally, we confirmed positive drainage across the field so water moves cleanly to the outlets. See more about our low-slope work on our Commercial Roofing page.

What We Installed (And Why)

EPDM is a proven rubber membrane for flat and low-slope commercial roofs. Installed fully-adhered, it bonds tightly to the substrate so wind cannot get underneath it, and its flexibility lets it handle the expansion and contraction that a large flat roof goes through with the seasons. The seams and flashing details are where flat roofs succeed or fail, so those transitions were sealed and reinforced to keep the entire surface continuous and watertight.

Over the membrane, the reflective silicone coating adds a seamless, UV-resistant top layer that bonds into a single monolithic surface with no seams for water to attack. Its bright, reflective finish bounces sunlight away from the building, which lowers rooftop temperatures and eases cooling loads during Rhode Island summers. Together, the membrane and coating give the property a tough, low-maintenance roof designed for long service life.

Good To Know: Does a reflective roof coating really lower cooling costs?

Yes. A dark flat roof absorbs a large share of the sun’s energy, driving rooftop temperatures up and pushing that heat into the building below. A reflective silicone coating flips that equation by bouncing much of the sunlight back before it turns into heat, so the roof runs cooler and the cooling system does not have to work as hard on hot days. For a commercial building with air conditioning and a large flat footprint, that reflectivity is a meaningful, year-after-year benefit on top of the coating’s watertight, seamless protection.

Why This Approach Works

Pairing a fully-adhered EPDM membrane with a reflective silicone coating combines two complementary strengths. The membrane provides a resilient, flexible waterproof base that handles movement and weather; the coating adds a seamless, reflective top layer that extends the system’s life and cuts heat gain. Because the coating cures into one continuous surface with no laps or fasteners exposed, there are no vulnerable seams for water to work into over time, and the whole assembly can be recoated down the road to reset its service life rather than being torn off. For a commercial owner, that translates into predictable maintenance and fewer surprises. It is a restoration-minded approach that protects the building’s interior and equipment while keeping long-term costs low — exactly what a busy commercial property needs from a low-slope roof.

Why Pinnacle

Pinnacle Roofing & Skylights has served Rhode Island since 2012 with a 5.0-star rating, more than 100 five-star Google reviews, and an A+ rating from the BBB. For commercial low-slope work we hold the credentials that matter: we are a Mule-Hide & Gaco Licensed Applicator and Firestone Building Envelope Certified, and we carry Rhode Island Commercial Lic #261 along with NRCA and RIBA membership. That means membrane and coating systems installed to manufacturer standards, so the warranty and the performance both hold up.

Warwick, RI

Warwick is one of Rhode Island’s largest commercial hubs, home to countless businesses along its main corridors and busy retail and service districts. Flat and low-slope roofs are everywhere here, and keeping them watertight and energy-efficient is essential for the owners who depend on them to protect their operations. We are glad to help local property owners get durable, code-compliant roof systems that hold up to New England weather. Explore our services for Warwick.

Need a commercial roof estimate in Warwick? Use our instant estimate tool, book a free appointment, or call us today.

Storm damage? See storm damage restoration — we handle the insurance process with you.

401-267-ROOF (7663)

Frequently Asked Questions

Why combine an EPDM membrane with a silicone coating in Warwick?

Each layer does a different job. The fully adhered EPDM gives the Post Road building a flexible waterproof base that handles seasonal movement, and the reflective silicone on top adds a seamless surface that cuts heat gain and protects the membrane from the sun.

Where can I learn more about EPDM roofs?

The EPDM Roofing Association publishes technical and owner information on EPDM membranes, including how they handle freeze-thaw cycles and ponding water. On this Warwick project, the membrane was fully adhered and detailed at every wall, curb and penetration before the coating went on.

Is a white roof coating worth it in New England?

For a busy commercial roof that takes full summer sun, often yes. ENERGY STAR explains how reflective cool roofs lower rooftop temperatures. In winter the effect is small, so the main benefits here are a seamless surface and less summer heat in the building.