At the Elmwood Avenue industrial building, the crew planned the flat-roof work tightly to limit disruption to the operations under the roof.
Pinnacle makes every project affordable with monthly financing options, including 0% interest for 18 months.
An industrial building on Elmwood Avenue in Cranston was showing the classic warning signs of a flat roof at the end of its life — water finding its way into the interior below the roof monitors. The property needed a durable, multi-layer flat-roof system that could stand up to a large footprint and years of weather. Pinnacle Roofing & Skylights re-roofed the building with a modified-bitumen membrane engineered for exactly this kind of low-slope commercial structure.
Scope of Work
We began with a full roof survey, documenting where water had been tracking in and tracing it back to failures in the existing surface. From there our crew prepped the low-slope deck, cleared away deteriorated material, and set a sound base for the new system. We installed a self-adhered base layer across the field, then laid the modified-bitumen cap membrane over it, detailing the seams so each ply locked into the next. Flashings were rebuilt at the roof monitors, parapets, and penetrations, since those transitions are where a large flat roof is most likely to leak. To see the range of low-slope systems we install, visit our Commercial Roofing page.
What We Installed (And Why)
This roof is a multi-ply modified-bitumen system: a self-adhered base sheet bonded to the deck and a tough modified-bitumen cap membrane over the top. Modified bitumen is a proven choice for large industrial roofs because it builds redundancy into the surface — more than one layer of waterproofing across the whole field. On a big, mostly flat roof where water lingers instead of running off, that layered protection is a real advantage over a single thin surface.
Because the interior was already showing water intrusion, the flashing details did the heavy lifting on this job. We rebuilt the terminations at the clerestory roof monitors, the parapet walls, and every penetration, tying the membrane tightly into each one. Those transitions — not the open field — are almost always where an aging flat roof gives up first. Sealing them into the new membrane means the water that reaches the roof stays on top of it and drains away instead of finding the ceilings below.
Project Photo Gallery
Good To Know: Why choose modified bitumen for a large industrial roof?
On a big low-slope roof, drainage is slow and foot traffic from equipment service is common, so the surface has to be both watertight and rugged. Modified bitumen answers both: multiple bonded plies mean water has to defeat more than one layer to get through, and the membrane holds up to the wear a working industrial roof sees. It is a workhorse system — one that trades flashy for dependable, which is exactly what an owner wants over occupied space full of equipment and inventory. For a roof that carries service traffic and years of weather, that layered durability is worth far more than a thinner surface that looks the same on day one.
Why This Approach Works
Pairing a self-adhered base with a modified-bitumen cap and rebuilding every flashing detail treats a flat industrial roof the way it needs to be treated: as a waterproofing system, not a single skin. The layered membrane resists the ponding and slow drainage that come with a large low-slope field, while the rebuilt terminations at the monitors, parapets, and penetrations shut down the leak paths that let water into the interior in the first place. It is a system sized and detailed for the real demands of a working commercial building.
Why Pinnacle
Flat industrial roofs demand a contractor who lives in low-slope systems, and that is our lane. Pinnacle is a Mule-Hide & Gaco Licensed Applicator and Firestone Building Envelope Certified, so our modified-bitumen and flashing work is installed to manufacturer specification. Operating in Rhode Island since 2012, we carry RI Commercial License #261, a BBB A+ rating, and a 5.0-star Google profile with 100+ five-star reviews. For a building where downtime and interior damage are costly, experience and credentials are not optional.
Cranston, RI
Cranston is one of Rhode Island’s largest cities, with a deep base of industrial, manufacturing, and commercial buildings alongside its neighborhoods. Many of those properties sit under wide flat and low-slope roofs that carry equipment and take decades of weather. Pinnacle is glad to help Cranston property owners protect their buildings with commercial roofing systems matched to how the structures are actually used.
Need a roof estimate in Cranston? Use our instant estimate tool, book a free appointment, or call us today.
Storm damage? See storm damage restoration — we handle the insurance process with you.
401-267-ROOF (7663)
Frequently Asked Questions
Why were the roof monitors leaking on this Cranston building?
Monitors are raised sections with walls and joints, and those joints are where an aging flat roof gives out first. The crew traced the water on this Elmwood Avenue building back to failures in the old surface, then rebuilt the flashing at every monitor and wall.
What does a multi-ply modified bitumen roof include?
A self-adhered base sheet bonded to the deck and a tough modified bitumen cap membrane on top. Two layers of waterproofing across the whole field give a large industrial roof built-in redundancy against ponding and foot traffic.
How often should a large industrial roof be inspected?
At least twice a year and after major storms, so small seam and flashing problems are caught early. The National Roofing Contractors Association has guidance for building owners on low-slope roof care, which fits a big building like this one in Cranston.