Beat the snow — book your roof replacement before winter hits. Instant quote in seconds →
Landmark PRO, EPDM, and VELUX Skylights on a Newport Home
After — Landmark PRO, EPDM, and VELUX Skylights on a Newport Home After

Landmark PRO, EPDM, and VELUX Skylights on a Newport Home

A Newport home with more than one kind of roof surface needs more than one kind of roofing done right. This project brought together three systems on one house: CertainTeed Landmark PRO shingles in Colonial Slate on the steep slopes, an EPDM rubber membrane on the flat section, and VELUX skylights flashed into the roof — each chosen for the part of the roof it protects. Pinnacle roofs go on fast — often as a one-day roof replacement — and flexible financing keeps a project like this within reach, with plans as low as 0% interest for 18 months.

A Newport home was re-roofed with CertainTeed Landmark PRO shingles in Colonial Slate on the steep slopes, an EPDM rubber membrane on the flat section, and VELUX skylights integrated with their engineered flashing. This project is in Newport, Rhode Island, finished in CertainTeed Landmark PRO — Colonial Slate.

Scope of Work

This roof had two distinct surfaces plus skylights, so the crew built each to its own correct standard. The steep slopes received the full weather system — ice-and-water shield at the eaves and valleys, synthetic underlayment, and new drip edge and starter — finished with heavier-weight CertainTeed Landmark PRO shingles in Colonial Slate. The flat section was covered in a single-ply EPDM rubber membrane, fully sealed at its seams and detailed up the walls and around penetrations so the low, slow-draining surface is waterproofed as one continuous sheet. The VELUX skylights were set into the sloped roof and flashed with their unit-matched metal flashing kits and ice-and-water membrane up the curbs. Bringing shingles, rubber membrane, and skylights together on one home takes a contractor comfortable in all three, so that every transition — slope to flat, roof to skylight — is sealed rather than simply covered.

What We Installed (And Why)

Each material here is the right answer for its part of the roof. On the steep slopes, CertainTeed Landmark PRO is the heavier-weight member of the Landmark family — a dual-layer architectural shingle with more mass than standard Landmark, a 130 mph wind rating, a Class A fire rating, Max Def color depth, and StreakFighter algae resistance, installed to a specification that earns CertainTeed’s strongest SureStart™ PLUS warranty. Its Colonial Slate color is a refined gray blend that gives the roof the look of natural slate — fitting for Newport, a town built on slate-roofed history — without slate’s weight or cost. On the flat section, EPDM is the proven choice: a single-ply rubber membrane prized for its long service life and its resistance to UV and Rhode Island’s temperature swings, installed as a continuous waterproof sheet where shingles could never shed water. And the VELUX skylights are No Leak units, dry because of their engineered layered flashing rather than sealant. The theme of this roof is matching the material to the surface: shingles where it is steep, rubber where it is flat, and engineered flashing where the glass meets the roof — the combination that keeps a mixed-surface home watertight everywhere at once.

Good To Know: Why would one house need both shingles and a rubber roof?

Because a single home often has more than one roof pitch, and pitch decides what can keep water out. Steep slopes shed water by gravity and overlap, which is exactly what asphalt shingles are designed for. But many homes also have a flat or low-slope section — a porch roof, an addition, a dormer, or a modern flat-roofed wing — where water drains too slowly for shingles to work; there, water would sit and eventually track back under the laps. That section needs a membrane instead, such as EPDM rubber, which waterproofs the surface as one continuous bonded sheet with sealed seams and no exposed fasteners. Using shingles on the steep parts and a membrane on the flat parts is not a compromise — it is doing each section correctly. The skill is in the transition where the two meet: the membrane has to be lapped and flashed up under the shingle courses so water steps cleanly from the slope onto the flat and off the roof. On this Newport home, matching Landmark PRO shingles to the slopes and EPDM to the flat section — and detailing the junction between them — is what makes the whole roof watertight.

Why This Approach Works

A mixed-pitch roof stays dry only when each surface gets the covering its slope requires — shingles where it is steep, a bonded membrane where it is flat — and the transition between them is properly flashed. Matching material to surface, rather than forcing one product across the whole roof, is what protects a home like this.

Why Pinnacle

A roof that combines shingles, rubber membrane, and skylights rewards a contractor fluent in all three systems and the transitions between them. As a VELUX 5-Star Skylight Specialist and CertainTeed ShingleMaster™, Pinnacle qualifies our customers for CertainTeed’s full SureStart™ PLUS extended warranty — coverage most contractors cannot offer. We’ve served Rhode Island since 2012, hold a 5.0-star Google rating across 100+ reviews and an A+ BBB rating — see our full credentials.

Newport, Rhode Island

Newport is Rhode Island’s storied coastal city, a place of historic homes, slate-roof traditions, and demanding ocean weather. Its houses range from tightly-built historic homes to properties with additions and flat-roofed sections added over generations, and its salt air and wind ask a lot of any roof. A combination of Landmark PRO in a slate-look color, EPDM on the flat sections, and well-flashed skylights suits both Newport’s architecture and the weather that tests it. Explore our work across Newport roofing services.

Need a roofing estimate in Newport? Use our instant estimate tool, book a free appointment, or call us today.

Exploring payment options? Ask about financing — plans as low as 0% interest for 18 months.

401-267-ROOF (7663)

Frequently Asked Questions

What makes Landmark PRO different from standard Landmark?

Landmark PRO is the heavier-weight version of the shingle — more mass, a 130 mph wind rating, Max Def color depth, and eligibility for CertainTeed’s strongest SureStart PLUS warranty when installed to specification. The extra weight and higher rating make it a premium step up for a homeowner who wants a richer look and more resilience.

How long does an EPDM rubber roof last?

EPDM is one of the longest-serving low-slope roofing materials, valued for its durability and resistance to UV and temperature swings; well-installed membranes routinely protect a flat section for decades. Its single-ply, fully-sealed construction is what makes it reliable where a shingle roof simply cannot shed water.

Why is Colonial Slate a good color for a Newport home?

Colonial Slate is a refined gray blend that mimics the look of natural slate — a fitting nod in a city with as much slate-roofed history as Newport — while Landmark PRO delivers that look without slate’s weight or cost. It suits both historic and traditional homes and pairs well with the grays and whites common on the coast.