Most of our full roof replacements, skylights included, are finished in a single day, and financing is available with 0% interest for 18 months for qualified homeowners.
This tall white home on Cole Avenue in Providence has a big hip roof, three dormers and a top floor that sat under the rafters with very little daylight. The owner wanted that upper level to feel bright and to breathe in the summer, and the old roof was due for replacement anyway. We combined the two jobs: new VELUX manual venting skylights went into the upper rooms, and the whole house got a fresh CertainTeed Landmark roof in Pewterwood, a soft weathered blend that sits well above white clapboard and a red brick chimney.
Scope of Work
The crew removed the old shingles, then cut and framed the new skylight openings from inside so each unit landed between the rafters. Each VELUX skylight was set on the deck with its own flashing kit, and underlayment was lapped up and around the frames before shingling. The roof was then covered in CertainTeed Landmark Pewterwood, with the dormers, chimney and ridges finished to match.
What We Installed (And Why)
VELUX manual Fresh Air skylights are deck-mounted venting units that open with a crank, so they bring in light and also let hot air out of the highest rooms in the house. Installed with VELUX’s matched flashing, they are part of the company’s No Leak skylight system, which adds an extra layer of protection around the frame. Doing the skylights during a full reroof let that flashing tie straight into new underlayment and shingles.
Landmark is CertainTeed’s dual-layer laminated shingle. Pewterwood mixes warm browns and grays, which softens the large white walls and keeps the roof from looking stark under the trees along Cole Avenue.
Project Photo Gallery
Good To Know: Where should a skylight go in a top-floor room?
Place it where the light will actually fall where you use the room, usually over the middle of the floor or a stair, not tucked into a corner. Venting skylights work best high on the slope, where warm air naturally collects. Check the rafters first: a unit sized to fit between them avoids cutting structure and keeps the job simpler.
Why This Approach Works
One project, one roof, one set of seams. Framing the openings, flashing the skylights and shingling the house in a single visit meant every layer was new and designed to work with the next, and the upper floor gained daylight and summer airflow without a second tear-off down the road.
Why Pinnacle
Pinnacle Roofing & Skylights is Rhode Island’s only VELUX Signature Skylight Specialist and a CertainTeed ShingleMaster Premier contractor. We have earned well over 100 five-star Google reviews and an A+ rating with the Better Business Bureau. See our VELUX skylight projects across the state.
Providence, RI
Cole Avenue sits on Providence’s East Side, where big two- and three-family houses share tree-lined streets with Colonial Revivals. Many of them have finished attics that were built for storage, not living, and skylights are one of the easiest ways to turn those spaces into bright rooms. See more on our Providence skylight page.
Need a skylight estimate in Providence? Use our instant estimate tool or book a free appointment.
Exploring payment options? Financing is available.
401-267-ROOF (7663)
Frequently Asked Questions
Can new skylights go into an older Providence home?
Yes. Many East Side and Mount Hope houses have finished top floors under the roof that never get much daylight. On this Cole Avenue home we framed the openings, set VELUX manual venting skylights in the upper rooms and tied them into a new CertainTeed Landmark roof in Pewterwood, so the skylights and shingles were flashed together.
How do manual venting skylights open?
A manual VELUX Fresh Air skylight opens with a crank handle. When the skylight sits higher than you can reach, a telescoping control rod hooks onto the handle from the floor. The two units in this Providence home let warm air escape from the top floor in summer without adding any wiring.
Why replace the roof and add skylights at the same time?
A skylight’s flashing is woven into the shingles around it. Doing both in one visit on this Providence job meant the skylight flashing kits, underlayment and Landmark Pewterwood shingles went in together as one watertight detail, and nobody had to open a brand-new roof later to add the windows.